Project: Egyptian 400kg/H Sawdust Briquetting Line
This sawdust briquetting line project is located in Egypt, its output is 400kg/h, it takes wood shavings, waste wood pieces (with the diameter around 20mm), twigs and branches (with the diameter of less than 200mm) as raw materials. Bigger branches shall be pulverized through a cutterhead crusher and saw shavings through the hammer mill; all the feedstock will be sifted either manually or directly.
Sawdust Briquette Plant Ready Sawdust Briquetting Line
Sawdust Briqutte Produced
And then raw material from the sifter will be transferred on the belt conveyer to the inlet of the dryer. Dried material via the cyclone will go to a screw conveyer where heat dissipation and evaporation of raw material proceed, which is a brilliant design of the project. Therefore, it is suggested the screw type conveyer is integrated to this machine. After the steps mentioned above are over, raw material will be conveyed into briquetting machine groups automatically.