Mobile Pellet Plant

The mobile pellet plant through our R&D is manufactured for professional pelletization. Main equipments within it include pulverizer, cyclone separator, silo, feeder, pellet mill, vibrating screen, bag type dust collector, foundation frame and electric cabinet. It can not only pelletize sawdust, stalks and straw, but also process forage and fodder for animals.

Mobile Wood Pellet Plant

The raw materials, also feedstock, cover sawdust, twigs, straw, rice husks, peanut shells and so on.

Small pellet plant pellet plant

The range of diameter of pellets: 6-12mm, with pellet density of 1.1-1.3t/m3 and moisture content of ≤8%;
Overall size (L*W*H): 3720X2080X2080;
Total installed capacity: 40.65KW

Process flow

Pulverizer-----Cyclone Separator-----Surge Bin----Screw Elevator----Feeder----PMZL-300B Pellet Mill-----Vibrating Screen-----Finished Products-----Bag Type Dust Collector

1. Pulverizer
The mobile pellet plant adopts hammer mill herewith, for the pulverizing section, the output of which is due chiefly to the size and moisture content of the feedstock and mesh size.

1.1   Main technical parameters

 Model  Power(kw)  Yield(kg/hr)  Qty of the hammer blades  Weight(kg)  Packing size(mm) Other references  
 TFS-420  7.5  550-700  16  280  1090*820*1100  Capable of pulverizing lumber with the diameter less than 30mm.

2. Surge bin
The bin is for feedstock storage. Here are two ways of putting the feedstock into the bin. On the one hand, thanks to air flow, the pulverized material will fall into the bin via cyclone separator; on the other hand, feedstock in qualified size can be added in straightforward from the bin inlet.

3. Screw elevator
The screw elevator, also known as screw conveyer hereby, is used to convey materials driven directly by the motor.

4. Feeder
The feeder, more like shape and structure of the screw conveyer aforementioned, is for putting feed into the pellet mill continuously.
4.1 The TRBs on each end shall be lubricated every four working hours.
4.2 Check oil level of the reduction gearbox on the feeder monthly, with the oil taking up one third of the gearbox. If not, please add it.

5. PMZL-300B pellet mill

 

Mobile Pellet Plant

1. adjusting nut  2.press rollers  3. lubricating nipple on the roller 4. flat die  5. main shaft  6 bearing  7.lubricating nipple of the reducer  8. reducer  9. motor  10. underframe

6. Vibrating screen
As a sifter, the vibrating screen also can help to cool pellets down at the same time. The pellet crumb and scraps collected under the wire mesh shall be cleaned away timely. Simultaneously, qualified pellets will be discharged at the rear outlet. During the operation, the sifter works stably.
What’s more, vibrating frequency can be converted. However, the rotating directions of the two motors shall keep opposite.

7. Bag type dust collector
It’s mainly for collecting powdery materials and dusts. Thanks to the collector equipped with an induced fan, the ash content of the exhausted air will remarkably reduced on one hand, and on the other, not only can pellets be cooled in the meantime, but the working environment can be kept as much clean as possible.
The fan possessing power of 3 KW and air volume of 2664-5268m3/h can suck powdery crumb and dust into the collector and filter them which will then be exhausted out to the open air. The whole set of bags can vibrate automatically and the shaking time and interval can be preset by simply adjusting the time relay. But crumb and dust will be piled up on the drawer of the collector. Please dump them timely or put them back to use into the surge bin.

You are welcome to contact us for more details of this small mobile pellet plant.



Briquette Press

Pellet Mill

Oil Press

Flour Mill

Roll Forming Machine

Feed Machinery